Browse all practice questions for the Physics Registry Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

Physics Registry Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • What does a sine wave represent in physics?
  • What characterizes the motion in simple harmonic motion?
  • What is the total attenuation of a 3.5 MHz pulse after passing through 2 cm of soft tissue?
  • Which of the following best describes kinetic energy?
  • If the amount of damping in an ultrasound system decreases, the bandwidth will:
  • Arrange the following media in correct order from the lowest attenuation to highest:
  • A transducer with which frequency would have the thickest elements?
  • What is the key difference between endothermic and exothermic reactions?
  • What factor is NOT directly described by Snell's Law?
  • What does the distance to reflector depend on, according to the range equation?
  • How does an increase in temperature typically affect gas pressure?
  • What is the formula for gravitational potential energy?
  • What is the effect of a thinner piezoelectric element on frequency?
  • Which law describes the relationship between flow and pressure differential, viscosity, and vessel length?
  • How does the size of the aperture affect the near zone?
  • Which unit is used to measure spatial pulse length?
  • What is the name of the control that compensates for attenuation related to path length?
  • The attenuation coefficient is commonly expressed in what unit?
  • What is the method by which a phased array transducer steers the transmitted sound beam?
  • Arrange the following media in terms of propagation speed from lowest to highest:
  • Which parameter can be adjusted by the operator?
  • Assuming oblique angle of incidence, what will the angle of transmission be if the propagation speed of medium 1 is greater than that of medium 2?
  • What best defines a photon?
  • What defines a magnetic field?
  • When sound waves pass through a medium with a propagation speed less than 1540 m/s, how are reflectors displayed?
  • What does the refractive index measure?
  • The frequency ranges for ultrasound are _____.
  • In which condition can a conductor material be typically found?
  • How is pressure defined in relation to force?
  • What happens to the angle of transmission if the speed of sound in the second medium is less than in the first when the sound beam hits at an angle?
  • What is true about axial resolution?
  • What effect does increasing frequency of a transducer have on propagation speed?
  • Which of the following is best defined as the ability to discriminate between two closely spaced reflectors?
  • Which type of energy is represented at the highest point of a pendulum swing?
  • Which law describes the relationship between temperature and gas pressure?
  • Bandwidth is defined as:
  • In ultrasound imaging, what element does the term "write magnification" refer to?
  • If the frequency of a transducer is increased, what happens to the wavelength?
  • What does 'amplitude' represent in wave physics?
  • What occurs during thermal equilibrium?
  • Which of the following factors does NOT affect gravitational potential energy?
  • Which force results in an acceleration of an object?
  • What does the term 'kinetic energy' refer to?
  • What does Hooke's Law describe?
  • What is the approximate value of the acceleration due to gravity near the Earth's surface?
  • What does an increase in amplitude indicate in wave behavior?
  • What is a common characteristic of electric potential energy?
  • What is a characteristic application of Snell's law?
  • What does ALARA stand for in a clinical context?
  • What does the first law of thermodynamics state?
  • What does the first law of thermodynamics imply about energy transformations?
  • What is torque a measure of?
  • How is frequency related to wave speed?
  • Which of the following best describes an endothermic reaction?
  • What is the definition of frequency in the context of physics?
  • What describes the Doppler Effect?
  • What is the layer of material within the transducer that has an intermediate impedance between the transducer element and human tissue called?
  • Which statement is true about parallel circuits?
  • What is defined as absolute zero?
  • What does Rayleigh scattering exemplify?
  • What happens to kinetic energy when work is done on an object?
  • The length of the pulse is known as what?
  • What must be known in order to calculate the distance to a reflector?
  • Which statement is true about color Doppler imaging?
  • What is the formula used to express Hooke's Law?
  • Which characteristic of laminar flow is correct?
  • What does Coulomb's Law describe?
  • What is the role of a capacitor in an electrical circuit?
  • How can the attenuation coefficient of sound in soft tissue be defined?
  • What distinguishes speed from velocity?
  • In a series circuit, how does current behave?
  • Which grayscale system is commonly used for signal dynamic range reduction?
  • If the _____ is increased, how does it affect flow?
  • If a 5-MHz wave travels through 5 cm of soft tissue, what happens to the propagation speed if a 3.5-MHz transducer is selected instead?
  • What device is used to measure acoustic output intensity levels?
  • In which zone does beam divergence occur?
  • What is a common characteristic of exothermic reactions?
  • What condition must be met for an object to be in static equilibrium?
  • Which two particles are found in the nucleus of an atom?
  • What is the formula for work done on an object?
  • Which statement correctly distinguishes between transverse and longitudinal waves?
  • What does increasing the number of focal zones generally do to the frame rate in ultrasound imaging?
  • The speed of sound in soft tissue is _____.
  • Which term describes the ability to distinguish between two separate structures in an image?
  • Area is measured in which unit?
  • What is represented along the x-axis on a spectral Doppler waveform?
  • What is a video display that only shows black and white called?
  • What is one benefit of using tissue harmonic imaging?
  • What is the maximum temperature increase that should not induce thermal biologic effects?
  • According to Newton's laws, what is the result of an unbalanced force acting on a stationary object?
  • When two sound beams with different frequencies travel through soft tissue, which will travel faster?
  • What is the initial format of information that travels to the scan converter from the receiver?
  • Which frequency range represents audible sound?
  • What happens to the amplitude of a wave if its energy is increased?
  • Which of the following methods preserves pixel density when enlarging the image?
  • Which of the following laws is not related to fluid dynamics?
  • Which of the following describes how fluid velocity affects pressure?
  • Which of the following laws pertains to the flow of viscous fluids?
  • The spatial resolution capabilities of the system are primarily functions of the:
  • What does the term "vector" imply in physics?
  • How can axial resolution be improved?
  • Which best describes an electromagnetic wave?
  • What does the Doppler effect explain?
  • Which factor determines the radial (axial) resolution of a system?
  • What does the work-energy principle state?
  • What is the reflected intensity from a boundary between two materials if the incident intensity is 1 mW/cm² and the impedances are 25 and 75?
  • Given an intensity transmission coefficient of 0.74, what will be the intensity reflection coefficient?
  • What effect does increasing pressure have on a fluid according to Pascal's Principle?
  • What is the most common type of flow found in the body?
  • What is the unit of measurement for electrical resistance?
  • As frequency increases, what generally happens to the resolution of the imaging?
  • What distinguishes scalar quantities from vector quantities?
  • What is buoyancy?
  • What is the number of pulses that occur in 1 second known as?
  • The unit for wavelength is:
  • What is the fundamental difference between a conductor and an insulator?
  • What effect does an unbalanced force have on an object?
  • What type of wave is sound?
  • A decibel (dB) describes what aspect of sound?
  • Which law is used to describe the refraction of light rays?
  • The wavelength in a material having a propagation speed of 1.5 mm/μs with a transducer frequency of 5.0 MHz is:
  • In B-mode imaging, where is amplitude located on the image?
  • How does friction affect motion?
  • What does the principle of conservation of momentum entail?
  • The echoes are stored before final display by the:
  • What is electric potential energy fundamentally based on?
  • What does the range equation explain?
  • What is the unit of pressure amplitude?
  • Which principle describes the inverse relationship between velocity and pressure?
  • Compression as a signal process is primarily concerned with what?
  • What is the primary focus of Doppler's law?
  • If two reflectors are 1.3 mm apart in a plane parallel to the beam, what will happen with an SPL of 2.6 mm?
  • In which type of reaction is energy actively absorbed?
  • Which statement about energy transformation is true?
  • What concept does inertia represent?
  • Which operator control adjusts the intensity of the transmitted pulse?
  • What law explains the angle of transmission at an interface based on the angle of incidence and propagation speeds?
  • What unit is used to measure energy?
  • Which statement accurately describes simple harmonic motion?
  • What principle states that sound waves arise from the interference of many wavelets at the transducer face?
  • What appears to happen to a reflector when sound travels through a large quantity of water?
  • How is acceleration defined?
  • How is total mechanical energy calculated in a system?
  • What is the relationship between spatial pulse length (SPL) and pulse duration?
  • Which formula would most likely be used in applications of Snell's law?
  • If the amplitude of a wave is tripled, how does the power change?
  • What Doppler mode uses the amplitude of the Doppler shift to provide an image demonstrating flow in a vessel?
  • What happens to gas pressure if the volume is held constant and the temperature is increased?
  • Most current ultrasound systems have _____ shades of gray available.
  • Which of the following describes the three types of heat transfer?
  • How does increasing the frequency of ultrasound affect its attenuation in soft tissue?
  • What else changes with a change in amplitude?
  • Which equation is used to express Newton's Second Law of Motion?
  • Which of the following is the unit of intensity?
  • How is momentum of an object calculated?
  • Enhancement is caused by:
  • In ultrasound, what does an increase in pulse repetition frequency affect?
  • How do sound waves travel through different mediums?
  • What is the relationship between the density of a medium and the speed of sound in that medium?
  • What is defined as an elastic collision?
  • Which frequency is classified as infrasound?
  • What is the outcome of an elastic collision?
  • The echo intensity on a grayscale of 32 shades is represented by the binary number:
  • Which of the following represents the strength of the beam?
  • What is acoustic impedance defined as?
  • What unit is used to measure impedance?
  • Which of the following represents a physical principle related to ultrasound transmission?
  • What technique allows for 'virtual palpation' of a lesion?
  • The piezoelectric effect can best be described as what?
  • How does a lens focus light?
  • Which property of ultrasound imaging is improved by increasing the size of the transducer aperture?
  • The intensity transmission coefficient is equal to what?
  • Specular reflections occur when?
  • What is the correct equation for Snell's law?
  • In which context would Bernoulli's principle be irrelevant?
  • What determines the near-zone length in ultrasound imaging?
  • The region where the sound beam is the smallest is called:
  • What is a primary drawback of using higher frequencies in ultrasound?
  • Which of the following describes the near field in ultrasound?
  • What is the relationship between amplitude and frequency?
  • How does a figure skater increase their spin speed?
  • Which factor is not related to axial resolution?
  • What is the principle of superposition in wave physics?
  • How does viscous blood affect flow according to Poiseuille's law?
  • What happens to flow if vessel length is decreased, assuming all other factors remain constant?
  • An ultrasound transducer converts:
  • What is the preferred method of sterilizing ultrasound transducers?
  • The acoustic impedance of a transducer's matching layer is chosen primarily to:
  • A two-element continuous-wave transducer is primarily used for:
  • Which statement regarding SPTA and SPTP is correct?
  • What happens to temporal resolution when more focal zones are used?
  • Which factor relates bandwidth to operating frequency?
  • How is buoyancy fundamentally defined in fluid mechanics?
  • Which of the following transducers fires the elements in groups?
  • Diffraction refers to what phenomenon?
  • What is the typical unit of frequency?
  • What happens to the beam area as distance from the transducer increases in the Fresnel zone?
  • In ultrasound imaging, what type of resolution refers to the ability to differentiate two structures that are close together?
  • Which characteristic of sound is referenced by the term 'wavelength'?
  • What type of reflection occurs when the reflector is significantly larger than the wavelength?
  • What is the final intensity if a wave's initial intensity is 2 mW/cm² with an increase of 10 dB?
  • What does the law of conservation of energy state?
  • What is Newton's Second Law of Motion?
  • What happens to the intensity reflection coefficient when the intensity transmission coefficient is 0.5?
  • What is the relationship between power and amplitude in waves?
  • Which of these best describes a conductor in an electrical context?
  • What is the typical value for the attenuation coefficient for 6-MHz ultrasound in soft tissue?
  • What does Pascal's Principle state?
  • In tissue harmonic imaging, the frequency used is:
  • What does Poiseuille's law specifically address?
  • What portion of the ultrasound system drives the transducer?
  • How is the slice-thickness plane focused in the most common type of transducers?
  • How many different shades of gray can the human eye discern at one time?
  • In normal incidence, if the impedance of medium 2 equals that of medium 1, what happens to the intensity?
  • If the gain of an amplifier is 18 dB, what is the gain after reducing the power by one-half?
  • According to Charles's Law, how does temperature affect gas volume?
  • What is an effect of focusing on ultrasound imaging?
  • Which is NOT a method of heat transfer?
  • Which of the following is described best as a transducer that has multiple elements in a curved shape?
  • Which operator control increases the acoustic exposure to the patient?
  • What type of resolution allows the ability to resolve two reflectors that lie parallel to the beam?
  • What is the primary function of a circuit breaker in an electrical system?
  • What effect does increasing the frequency of a transducer have on spatial resolution?
  • Which of the following resolutions is least affected by changing the focus settings in ultrasound?
  • What happens to the power if the intensity is doubled?
  • If a sound beam encounters an interface at a 90-degree angle with tissue sound speeds of 1540 m/s and 1450 m/s, what is the angle of transmission?
  • Which of the following materials is most commonly used in ultrasound transducers?
  • How many bits of pixel can be displayed with 4 bits of memory?
  • When measuring the speed of sound, which law is often applied?
  • What is the average attenuation of ultrasound in dB/cm for each megahertz of frequency?
  • What medium has the slowest propagation speed?
  • What happens to kinetic energy if the velocity of an object doubles?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy